Product discontinued !

This product is no longer available.



The 4 x 8 matrix allows connection of any row (1 through 8) with any column (1 through 4). The matrix consists of 32 SPST relays (labeled 11 through 18, 21 through 28, 31 through 38, and 41 through 48) forming a 4 by 8 matrix switch, where any of the inputs 1 through 8 can be connected with any of the four “Analog Bus” lines. Five additional relays allow connect/disconnect of the matrix from the Analog Bus, as well as grounding selected terminals to the Analog Common to enable single ended measurements.  Large matrixes can be easily built by connecting the “Analog Bus” terminals together with short jumper cables. 


         

 

System requirements: 

- Windows 2000 or Windows XP 

- Microsoft Internet Explorer from Version 5.01

- Microsoft .NET Framework Version 1.1

- National Instruments VISA Library or Agilent Technologies IO Libaries Version M or higher.

USB versions: 2.0 and 1.1 "Full speed"

USB connection: USB Typ "B"

USB current consumption: 350mA maximum

Switched voltage and current: 

100VAC maximum

100VDC maximum

0.5 Ampere maximum

Switched Power: 

10W Maximum

Carrying Current: 1.5A maximum

Total Channel Resistance: 0.3 Ohm initial (typical)

(Measured from the front panel connector to the rear panel Analog Bus)

Screw terminal wire: AWG 28 16

Screw terminal torque: 0.22 0.25 Nm

Documentation & Downloads:

Printable datasheet (coming soon)

Manuals and application notes 

Download GUI software 

Cable and connectors